Product Description
T5215-g is an industrial guide rail power adapter with strong stability and high reliability, with an output power of 65W. The product adopts standard industrial wiring port. It can be applied in the range of input AC voltage 100 ~ 240VAC, and the output voltage of the product is DC 52v1 25A, the circuit adopts ultra-low ripple design, and DIN rail installation can meet the power supply needs of various industrial equipment. The performance and process meet the requirements of national CQC standard (GB 4943.1-2011). The product has ultra-small leakage current (< 0.5mA) and adopts closed aluminum alloy shell for heat dissipation, which is suitable for equipment requiring long-term stable power supply.
The working efficiency of t5215-g power adapter is ≥ 90%, and the no-load power consumption is less than 0.2W. This product complies with CQC / FCC / CE / RoHS and other national and international standards, and the power consumption meets the level VI energy efficiency grade; It also supports multiple safety protection such as short circuit / overload / overvoltage / overtemperature protection. The dust-proof grade of the shell reaches IP40. Under the condition of air circulation, the product can support a wide range of working temperature of - 20 ~ + 70 ℃, providing users with the use guarantee that meets the requirements of industrial environment.
Product model t5215-g
output
Installation mode: guide rail type
DC voltage (Note 2) 52V
Rated current 1.25A
Current range: 0 ~ 1.25A
Rated power 65W
Ripple and noise (Note 3) ≤ 100mvp-p
Voltage accuracy (remark 4) ± 3.0%
Linear adjustment rate (Note 5) ± 1.0%
Load adjustment rate ± 6.0%
Start, rise time (Note 6) 2S, 30ms / 220VAC 3S, 30ms / 110VAC (at full load)
Hold time (typ.) 16ms / 230VAC 16ms / 115VAC (at full load)
input
Input voltage range (Note 7): 90V ~ 264Vac
Rated input voltage 100V ~ 240VAC
Frequency range: 47 ~ 63Hz
Efficiency (typ.) ≥85%
AC current (typ.) 1.5A/100VAC； 0.75A/240VAC
Surge current (typ.) 20A/100VAC
Leakage current (maximum) contact current < 0.3ma/264v/60hz
Insulation strength (withstand voltage) ≥ 2500vac
protect
105% ~ 125% of overload rated output power
Protection mode: burping mode, which can be recovered after the abnormal load condition is removed
Overvoltage
53~ 55V
Protection mode: turn off the output voltage, restart and recover
Overcurrent 1.35a
environment
Operating temperature - 20 ~ + 70 ℃ (please refer to "derating curve")
Working humidity 20 ~ 90% RH, no condensation
Storage temperature / humidity - 40 ~ + 85 ℃; 10 ~ 95% RH, non condensing
Temperature coefficient ± 0.03% / ℃ (0 ~ 40 ℃)
Vibration resistance 10 ~ 500Hz, 2G 10 minutes / cycle, x, y and Z axes 60 minutes each
mechanical strength
Overall tensile force (35n)
Shell material: aluminum alloy
Shell bearing capacity 350n
The heat-resistant temperature shall not be lower than 90 ℃ for 7h
Fire rating V-0
mechanical properties
MTBF ≥43.8Khrs MIL-HDBK-217F (25℃)
Size 120 * 89 * 34mm (L * w * h)
Package 308G; 72pcs/22.80Kg
Rail clip din-35
Connector
Interface type Phoenix terminal input terminal 3pin (recommended not less than 0.5mm) ² Copper wire)
The output terminal is 4Pin (positive * 2 / negative * 2), which is not recommended
Below ul2464 22# L ≥ 1m copper wire)
Grounding enclosure grounding
info@aopre.com
0086+400-000-8380
Room 305, floor 3, Zone C, building 3, Huiye science and Technology Park, sightseeing Road, Tangjia community, Fenghuang street, Guangming District, Shenzhen