Product Description
Multi service optical transceiver the digital optical transceiver independently developed and produced by our company adopts the international most advanced digital optical fiber transmission technology to realize synchronous, distortion free and high-quality transmission on single core optical fiber with 4-way bidirectional video, 8-way forward switching value, 8-way reverse switching value, 2-way RS485, 2-way RS232, 2-way telephone and 4-way 10 / 100 / 1000m Ethernet (sharing). The optical transceiver adopts all digital video non compression transmission technology, which can meet the needs of users. It is easy to install and does not need on-site adjustment. Its optical module and core circuit adopt imported components with stable performance and are suitable for different working environments. For IP supermarkets, living quarters and military government units, the equipment adopts super large-scale integrated circuit design. The design is concise. It has the advantages of easy installation and debugging, maintenance free and stable performance. It is suitable for major communication operators, governments, enterprises and institutions. The optical transceiver is designed with a full industrial wide temperature range. At the same time, due to the use of optical fiber as the transmission medium, it has excellent performance, high temperature and cold resistance, can effectively prevent strong electromagnetic wave radiation interference, lightning impulse and power surge, and the communication quality is stable and reliable.
major function
Transmission signal category: video, switching value, data, Ethernet, telephone signal
Fibre channel: 1 channel
Wavelength: 1310-1550nm
Speed: 2.5Gbps
Transmitted light power: > - 8dB
Receiving sensitivity: > - 24dB
Optical port: FC (SC / St optional)
Video index
Video interface channel: 4-way bidirectional video
Video format: PAL / NTSC / SECAM automatic compatibility
Video bandwidth: 6mhz
Video sampling: 20MHz high speed sampling
Differential gain: DG < 1% (typical value)
Differential phase: DP < 0.7 ° (typical value)
Video signal-to-noise ratio: S / N ≥ 67db (weighted)
Video interface: BNC
Network indicators
Network channel: 4-way Gigabit shared
Network bandwidth: adaptive 10 / 100 / 1000m rate
Standard protocol: IEEE802 3ab 1000Base-T , IEEE802. 3z 1000Base-SX/LX Gigabit thernet,IEEE802. 1qVLAN,IEEE802. 1p QoS,IEEE802. 1d Spanning Tree
Physical interface: jr45
Data indicators
Standard: comply with EIA RS-232 and RS-485 standards
Physical interface: Industrial wiring terminal
Baud rate: 50 bps to 256 Kbps (support non-standard baud rate)
RS232: 3-wire system (RXD, TXD, GND), full duplex, point-to-point communication
The maximum communication distance is 15 meters
RS485: 2-wire (a, b), half duplex, point to multi master-slave communication
The maximum communication distance is 1219m, and the transmission rate is inversely proportional to the transmission distance
RS485 circuit index
RS-485 pull-up resistance / pull-down resistance: 1 K Ω, 150 K Ω
RS-485 terminal resistance: n / A, 120 Ω and 120 K Ω
Switching value index
Input electrical parameters: dry node, uncharged (short circuited or disconnected)
Output electrical parameters: dry node, dead (short circuited or disconnected)
Maximum switching voltage of output relay: 250VAC / 220VDC
Maximum switching electric current of output relay: 2A
Mechanical durability of output relay: 100000000 times
Maximum output power of relay: 60W
Normally open and normally closed: normally open
Physical interface: Industrial wiring terminal
Telephone index
Telephone interface signal: SPC exchange / extension mode
Physical interface: RJ11
Power index
Applicable power supply range: AC100-240V 50 / 60Hz
Power supply mode: built-in power supply
Power consumption: < 30W
Mechanical index
Shell: aluminum alloy
Size: 440 * 200 * 45mm
Net weight of product: 1.45kg single set
Installation: 1U chassis